Mixing nozzles are designed for the proper proportioning and mixing of the different adhesive formulations. Use only appropriate Simpson Strong-Tie mixing nozzle in accordance with Simpson Strong-Tie’s instructions. Modification or improper use of mixing nozzle may impair epoxy or acrylic performance.

EMN22i

An 18-element mixing nozzle for use with 22 oz. and 56 oz. Epoxy-Tie® cartridges and the 30 oz. AT Acrylic-Tie® adhesive cartridge. This is a one piece nozzle with integrated nut (separate retaining nut not required).

EMN37A

An 18-element, high-strength, mixing nozzle for dispensing Epoxy-Tie® adhesive through bulk metering equipment.

EMN50

A hi-volume 5/8" diameter 24-element nozzle, with an integrally molded retaining nut. This nozzle provides approximately 2 times the dispensing rate of the EMN22i. The major outer diameter is 7/8". Fits 22 oz., and 56 oz. cartridges.

AMN813
For 5 oz., 8 oz., 10oz., and 13 oz. AT Acrylic-Tie® adhesive cartridges

12-element mixing nozzle with integrally molded retaining nut for use with 5oz., 8 oz., 10 oz. and 13 oz. AT Acrylic-Tie® adhesive cartridges.