www.simpsonanchors.com


Example Calculation: Adhesive Anchors (ICC-ES AC308)

Example Calculation for a single SET-XP™ Epoxy Adhesive Anchor using USD

Determine if a single 1/2 inch diameter ASTM A193 Grade B7 anchor rod in SET-XP epoxy adhesive anchor with a minimum 4 1/2 inch embedment (hef = 4 1/2 inches) installed 4 inches from the edge of a 12 inch deep spandrel beam is adequate for a service tension load of 1,300 lb for live and a reversible service shear load of 450 lb for live. The anchor will be in uncracked dry concrete, away from other anchors in ƒ'c = 3,000 psi normal-weight concrete. The anchor will be subjected to a maximum short term temperature of 110°F and a maximum long term temperature of 75°F. Continuous inspection will be provided.

Reference the appropriate tables for SET-XP epoxy adhesive anchor performance values as determined from testing in accordance with ICC-ES AC308.

Four anchor layout.

Note: Rebar not shown for clarity.


go to top of page
calculation
go to top of page
calculation
go to top of page
calculation
go to top of page
calculation
go to top of page
calculation
 
Printed from
© 2008 Simpson Strong-Tie®