When hole placement conflicts with rebar or wire mesh, these bits enable the rebar to be removed so the hole can be drilled to the proper depth. Rebar cutters are separate from shanks. Shanks work with all sizes of rebar cutters.

Rebar Cutter

* After drilling through the reinforcement or plate, remove debris from the hole and resume drilling with carbide tipped drill bit.

Similar to Rebar Cutters, these bits are designed for cutting through steel base plates when it is necessary to enlarge the fixture hole. These bits can also be used as rebar cutters. Plate cutters are separate from shanks. Shanks work with all sizes of plate cutters.

Plate Cutter

* After drilling through the reinforcement or plate, remove debris from the hole and resume drilling with carbide tipped drill bit.

SDS-Plus Shank

Spline Shank

SDS-Max to SDS-Plus Adaptor

Spline to SDS-Plus Adaptor

SDS-Top (T-ET style) to SDS-Plus Adaptor