GCN150 Gas-Actuated Nailer

The GCN150 is a portable gas-actuated nailer for attaching light-duty fixtures such as drywall track, furring strips, hat track and angle track to concrete, steel, block and metal deck. The GCN150 uses a 1,300 shot fuel cell and features a 40 pin magazine for high volume productivity.

AT10 Anchoring Adhesive

AT10 Acrylic-Tie® adhesive is a 9.6 ounce single tube cartridge that can be dispensed with a commonly available 10 ounce dispensing tool. A special dispensing tool is not required. AT10 adhesive comes with a mixing nozzle and offers the same performance characteristics as the rest of the Acrylic-Tie product line.

Strong-Bolt™ Anchor

The Strong-Bolt wedge anchor is specifically designed for optimum performance in both cracked and uncracked concrete - meeting the post-installed anchor performance requirements of the 2006 IBC. The Strong-Bolt anchor has proven to offer increased reliability in the most adverse conditions, including proper functioning in cracked concrete under static and seismic loads.

Titen HD® Anchor

The Titen HD heavy-duty anchor is a patented screw anchor designed for use in concrete and masonry applications. This anchor is code tested to provide outstanding performance in cracked and uncracked concrete under both static and seismic conditions. It is designed to meet the requirements that the 2006 IBC places on post-installed anchors. In addition to being an ideal anchor for a variety of severe structural applications, the non-expansion installation characteristics make it ideal when minimum edge distance and reduced spacing is a concern.

CIP-F Paste-Over

CIP-F is a flexible, peelable and fast-curing polyurea paste-over material. It is used to temporarily seal cracks and to secure injection ports over concrete prior to epoxy or urethane foam injection repair. CIP-F can be peeled off at the completion of a crack injection job by pulling on starter tabs initially placed under the top surface of the paste-over at the time of application or by prying under the paste-over.

CIP Paste-Over

CIP is a fast-curing, two-part epoxy paste-over material. It is used to seal cracks and to secure injection ports over concrete prior to epoxy or urethane foam injection repair. CIP sets up hard and can either be left on the concrete or ground or chiseled off at the completion of a crack injection job.

Stainless-Steel Titen® Concrete & Masonry Screw

The new stainless-steel Titen® screws are ideal for attaching all types of components to concrete and masonry in environments where corrosion is a concern. These screws, available in hex and phillips head styles, combine the versatility of our standard Titen screws with the benefits of enhanced corrosion protection.

PDPA Powder-Actuated Pins

PDPA pins are specifically designed for driving into structural steel that is up to 1/2" thick, and into extra hard concrete. Manufactured to tight tolerances for maximum performance in demanding substrates where speed and convenience offered by powder actuated fastening is desired.

Integrated Epoxy Adhesive Nozzle

The EMN22i is a one piece, integrated adhesive mixing nozzle for use with 22 oz. and 56 oz. Epoxy-TieŽ cartridges and 30 oz. Acrylic-TieŽ cartridges. This 18 element mixing nozzle ensures proper proportioning and mixing of two-component adhesive formulations.

EDOT™ Anchoring Adhesive

EDOT™ Epoxy-Tie® is an epoxy adhesive formulated to be an economical and high strength alternative for transportation projects. Available in cartridge and bulk packaging, it is an ideal adhesive for threaded rod anchoring and rebar doweling.

TORQ-CUT™ Anchor

The Torq-Cut™ self-undercutting anchor is a heavy-duty, high-capacity anchor designed and tested for use in cracked and uncracked concrete under static and seismic-loading conditions. It is designed to meet the requirements that the 2006 IBC places on post-installed anchors. The built-in ring with hardened cutters expands with installation torque forming undercut grooves in the concrete. This interlocking connection between the anchor and the concrete provides superior load carrying capacity.

ICC-ES PENDING
Product testing has been completed by an ICC-ES accredited test laboratory, and the data has been submitted to, and is currently under review by ICC-ES.