SET-XP™ Anchoring Adhesive

SET-XP™ is an anchoring epoxy formulated and tested in accordance with ICC-ES AC308 to meet the requirements of the 2006 IBC. It has been tested with the IXP anchor, threaded rod and rebar. It has proven to offer increased reliability in adverse conditions in cracked and uncracked concrete including proper functioning in cracked concrete under static and seismic loading. SET-XP cures to a teal color for easy identification as an epoxy formulated for Ultimate Strength Design requirements.

CODE LISTED: ICC-ES ESR-2508

IXP™ Anchor

The IXP™ anchor is a uniquely designed torque-controlled adhesive anchor. When used as a system with SET-XP™ epoxy, the IXP anchor provides high performance and reliability in adverse conditions, including tension and seismic zones where cracks may intersect the anchor. The IXP anchor was designed to perform in accordance with ICC-ES AC308 to meet the requirements of the 2006 IBC.

ICC-ES PENDING
Product testing has been completed by an ICC-ES accredited test laboratory, and the data has been submitted to, and is currently under review by ICC-ES.

Strong-Bolt™ Anchor

The Strong-Bolt™ wedge anchor is specifically designed for optimum performance in both cracked and uncracked concrete. It is designed and tested in accordance with ICC-ES AC-193 to meet the requirements of the 2006 IBC. The Strong-Bolt anchor has proven to offer increased reliability in the most adverse conditions, including proper functioning in cracked concrete under static and seismic loads.

CODE LISTED: ICC-ES ESR-1771

Titen HD® Anchor

The Titen HD® heavy-duty anchor is a patented screw anchor designed for use in concrete and masonry applications. This anchor is code tested to provide outstanding performance in cracked and uncracked concrete under both static and seismic conditions. It is designed and tested in accordance with ICC-ES AC-193 to meet the requirements of the 2006 IBC. In addition to being an ideal anchor for a variety of severe structural applications, the non-expansion installation characteristics make it ideal when minimum edge distance and reduced spacing is a concern.

CODE LISTED: ICC-ES ESR-2713

Titen HD® Rod Hanger

The Titen HD Rod Hanger provides a fast and convenient method of attaching threaded rod to the underside of concrete slabs and beams. Installation is as simple as drilling a hole and then driving the anchor. The Titen HD Rod Hanger maintains a high load capacity - which makes it ideal for hanging pipes, equipment, and various fixtures.

Crimp Anchor

The Crimp anchor is a multi-purpose anchor designed for use in concrete and grout-filled block. The shape of the anchor provides multiple contact points with the base material which secures the anchor in place. With a variety of head styles available, the anchor is suitable for a wide range of applications.

Titen HD® Mini

The Titen HD Mini anchor provides an excellent solution for jobs that require smaller anchors. The non-expansion characteristics are ideal for situations where minimum edge distance and reduced spacing is a concern. The patented cutting teeth and thread design enable Titen HD Mini anchors to be installed with less effort than many other screw type anchors. Also, the Titen HD Mini anchors can be installed in less time than typical expansion anchors.

PDPA Powder Actuated Pins

PDPA pins are specifically designed for driving into structural steel that is up to 1/2" thick, and into extra hard concrete. Manufactured to tight tolerances for maximum performance in demanding substrates where speed and convenience offered by powder actuated fastening is desired.

Integrated Epoxy Adhesive Nozzle

The EMN22i is a one piece, integrated adhesive mixing nozzle for use with 22 oz. and 56 oz. Epoxy-TieŽ cartridges and 30 oz. Acrylic-TieŽ cartridges. This 18 element mixing nozzle ensures proper proportioning and mixing of two-component adhesive formulations.

Anchor Designer Software ACI 318
FREE DOWNLOAD

Anchor Designer Software™ ACI 318 analyzes and suggests anchor solutions using the ACI 318, Appendix D Strength Design methodology (or CAN/CSA A23.3 Annex D Limit States Design methodology). It provides cracked and uncracked-concrete anchor solutions for numerous Simpson Strong-Tie Anchor Systems mechanical and adhesive anchors. With its easy to use graphical interface, Anchor Designer Software ACI 318 eliminates the need for tedious calculations by hand that would otherwise be necessary to determine crackedconcrete anchor solutions.

ANCHORS SUPPORTED:

• Strong-Bolt™ wedge anchor
• Titen HD® heavy-duty screw anchor
• SET-XP™ adhesive with threaded rod
• SET-XP adhesive with rebar
• SET-XP adhesive with the torque-controlled bonded IXP™ anchor
• Coming Soon: Torq-Cut™ self-undercutting anchor

Download Anchor Designer Software ACI 318 today!

TORQ-CUT™ Anchor

The Torq-Cut™ self undercutting anchor is a heavy-duty, high-capacity anchor designed and tested for use in cracked and uncracked concrete under static and seismic loading conditions. It is designed and tested in accordance with ICC-ES AC-193 to meet the requirements of the 2006 IBC. The built-in ring with hardened cutters expands with installation torque forming undercut grooves in the concrete. This interlocking connection between the anchor and the concrete provides superior load carrying capacity.

ICC-ES PENDING
Product testing has been completed by an ICC-ES accredited test laboratory, and the data has been submitted to, and is currently under review by ICC-ES.