Infinite Menus - Place Holder (Dreamweaver Design View)
Sleeve-All® Tension and Shear Loads:
Normal-Weight Concrete
- The tabulated allowable loads are based on a safety factor of 4.0 for installations under the UBC. For installations under the IBC and IRC, use a safety factor of 5.0 (multiply the tabulated allowable loads by 0.80).
- Allowable loads may not be increased for short term loading due to wind or seismic forces.
- Refer to allowable load adjustment factors for spacing and edge distance.
- Drill bit diameter used in base material corresponds to nominal anchor diameter.
- Allowable tension loads may be linearly interpolated between concrete strengths listed.
- The minimum concrete thickness is 1 1/2 times the embedment depth.
