Infinite Menus - Place Holder (Dreamweaver Design View)
WEDGE-ALL® Wedge Anchors
Tension Loads for Carbon-Steel Wedge-All (and Tie-Wire) Anchors
in Normal-Weight Concrete
- The allowable loads listed are based on a safety factor of 4.0.
- Allowable loads may be increased by 33 1/3% for short-term loading due
to wind or seismic forces where permitted by code.
- Refer to allowable load adjustment factors for edge distance and spacing.
- Drill bit diameter used in base material corresponds to nominal anchor diameter.
- Allowable loads may be linearly interpolated between concrete strengths listed.
- Allowable loads for 1/4-inch size at 1 1/8-inch embedment apply to both the Wedge-All and Tie-Wire anchors. Installation torque does not apply to the Tie-Wire anchor.
- The minimum concrete thickness is 1 1/2 times the embedment depth.
