JUMP TO:
Standard
Metric
Fastener Loads
ALSO SEE:
Product Submittal (PDF)
Code Reports: ICC Evaluation Service ESR-2138 (PDF) City of Los Angeles RR25469 (PDF)
NOTE: All .300" headed fasteners have a .145" shank diameter unless otherwise noted.
PDPH - .300" Headed Fasteners with .177" Shank Diameter
PDPMG - .300" Headed Fasteners - Mechanically Galvanized
PDPHMG - .300" Headed Fasteners - Mechanically Galvanized
PDPSS - 316 Stainless Steel .300" Headed Fasteners with .177" Shank Diameter
PDPW - .300" Headed Fasteners with 3/4 " Metal Washers
PDPWL - .300" Headed Fasteners with 1" Metal Washers
PDPHWL - .300" Headed Fasteners with 1" Metal Washers with .177" Shank Diameter
PDPWLSS - 316 Stainless Steel .300" Headed Fasteners with 1" Metal Washers
PINW - .300" Headed Fasteners with 1 7/16 " Metal Washers
PINWP - .300" Headed Fasteners with 1 3/4" Plastic Washers
PDPT - .300" Headed Tophat Fasteners
PHBC - Highway Basket Clips - .300" Fasteners
PCC/ PBXDP - Pre-Assembled BX Cable Straps and Conduit Straps - .300" Headed Fasteners
PCLDP/ PECLDP - Pre-Assembled Ceiling Clips - .300" Headed Fasteners
PECLDP - Pre-Assembled Ceiling Clips with Pre-Tied Wire - .300" Headed Fasteners
PSLV4 - 1/4" - 20 Threaded Studs
PSLV3 - 3/8" - 16 Threaded Studs
PHD - 1/4" Headed Hammer Drive Fastener with 3/8" Metal Washer
NOTE: All 8 and 6mm fasteners have a 3.68 mm shank diameter unless otherwise noted. Lengths in inches are for reference only and may not be exact.
PHNW - 8MM Headed Fasteners with 1" Metal Washers
PHK - 6MM Headed Fasteners with 12MM Washers
PINW - 8MM Headed Fasteners with 1 7/16" Washers
PINWP - 8MM Headed Insulation Fasteners with 1 3/4" Plastic Washer
PHNT - 8MM Headed Tophat Fasteners
