www.simpsonanchors.com


PDP and PDPH Series Fasteners

Tension and Shear Loads in Steel

 
Tension Load Shear Load Steel
PDP Series Fasteners - Tension and Shear Loads in Steel
PDP Series Fasteners - Tension and Shear Loads in Steel

See notes below.

Tension Load Shear Load Steel
PDPH Series Fasteners - Tension and Shear Loads in Steel
PDPH tension and shear loads in steel
  1. The entire pointed portion of the fastener must penetrate through the steel to obtain the tabulated values.
  2. The allowable tension and shear values are for the fastener to steel only. Connected members must be investigated separately in accordance with accepted design criteria.
  3. Steel must conform to ASTM A36 specifications, with Fy = 36,000 psi, minimum.

For more information on these fasteners see the Fasteners index.

 
PDP

PDP

 
PDP

PDPH

 
PDPW

PDPW

 
PDPWL

PDPWL

The table applies to the following Simpson Strong-Tie fasteners where minimum penetration exists:

following Simpson Strong-Tie fasteners where minimum penetration
 
Printed from
© 2008 Simpson Strong-Tie®

ADHESIVES | MECHANICAL ANCHORS | POWDER ACTUATED FASTENING | DRILL BITS
About Us | Privacy Policy | User Agreement | Limited Warranty | Product Use Information | Simpson Manufacturing

Copyright © 2008, Simpson Strong-Tie Company, Inc

All rights reserved. Contact us with questions or comments.