 |
Information on this page has been updated since the printing of the 2008 Anchor Systems Catalog To view the specific changes made to this page in detail, see Catalog Errata. |
For more tool information, please follow the links in the Tool column or download Operator's Manuals.
| Tool | Kit Model No. | Description | Contents |
|---|---|---|---|
|
PTP-27ALPK1A |
Normal wear part replacement kit | 1 Piston (Part No. PTP-730070CH) | |
| 1 Piston Disk (Part No. PTP-730071CH) | |||
| 5 Rubber Returners (Part No. PTP-730008) | |||
|
PTP-27ALPK2A |
Power regulator rebuild kit |
1 Regulator Bolt (Part No. PTP-914020) | |
| 1 Regulator Nut (Part No. PTP-914021) | |||
| 1 Regulator Shock Absorber Assembly (Part No. PTP-720061) | |||
| 1 Regulator Cover (Part No. PTP-914590) | |||
| 2 Regulator Cover Screws (Part No. PTP-BN11288) | |||
|
PTM-27PK1 |
Normal wear part replacement kit | 1 Piston (Part No. PTM-01112) | |
| 2 Buffers (Part No. PTM-01114) | |||
|
PTM-27PK2 |
Piston reset
assembly rebuild kit (Note: for tools with 'A' suffix on serial number only) |
1 Piston Reset Pin (Part No. PTM-01107) | |
| 1 Piston Reset Spring (Part No. PTM-03122) | |||
| 1 Piston Reset Cap (Part No. PTM-03108) | |||
|
PTM-27PK3 |
Trigger / load advance rebuild kit | 1 Trigger (Part No. PTM-01109) | |
| 1 Trigger Extension (Part No. PTM-01109A) | |||
| 1 Advance Lever (Part No. PTM-01118) | |||
| 1 Advance Lever Spring (Part No. PTM-01128) | |||
| 1 Lever Pilot Screw (Part No. PTM-01137) | |||
| 1 Handle Pad Assembly (Part No. PTM-01116A) | |||
|
PT-27PK1 |
Normal wear part replacement kit | 5 Shear Clips (Part No. PT-301011) | |
| 1 Annular Spring (Part No. PT-301014) | |||
| 1 Piston Stop (Part No. PT-301012) | |||
| 3 Ball Bearings (Part No. PT-301013) | |||
| 1 Piston (Part No. PT-301217) | |||
| 2 Piston Rings (Part No. PT-301208) | |||
| 1 Nosepiece (Part No. PT-301010) | |||
|
All |
PT-MK1 |
Tool cleaning kit | 1 Cleaning Brush - Wire (Part No. BRUSH 125) |
| 1 Cleaning Brush 3/4" Diameter (Part No. BRUSH 25) | |||
| 1 Cleaning Brush 1/4" Diameter (Part No. BRUSH 75) | |||
| 1 PAT Tool Lubricant - 4 oz. spray bottle (Part No.PT-MTL4.0) | |||
| (1) 1/8" Hex Wrench (Part No. MW-18) | |||
| (1) 3/16" Hex Wrench (Part No. MW-316) | |||
| (1) 5mm Hex Wrench (Part No. MW-5) | |||
|
All |
PT-MTL4.0 |
Tool lubricant | 4 oz. spray bottle |